Bitte beachten:
Die Qualität Ihres Uploads ist zu gering. Wir empfehlen die Datei nicht zu verwenden. Falls Sie die Datei dennoch verwenden möchten, können wir keine Garantie für das Druckergebnis übernehmen.
Hinweis:
Die Dateigröße des Uploads überschreitet leider die zulässige Größe. Bitte wählen Sie eine Dateigröße kleiner als 10 MB.
Vorschau wird erstellt. Bitte warten.
UPLOAD_MESSAGE
0 KB
/
0 KB
BEING_UPLOADED
0

AEM Fuel/Ignition Controller F/IC 8

Product Number:  
600505
Delivery within 3-5 days
  
 Add to Cart 

F/IC-8

AEM’s F/IC-8 is a piggyback engine control unit that works in parallel with the factory ECU. It enables racers to retard ignition timing and deliver accurate amounts of fuel without the need for outdated FMUs or “boost hiding” controllers. This system works on OBD-II-equipped race vehicles with non-factory forced induction systems with or without variable cam timing and prevents tuning limitations due to complex factory timing patterns.

  • Ideal for non-factory forced induction vehicles with variable cam timing (VTEC, VVTi, MiVEC, etc)
  • Will not affect climate controls, dash or other components on CAN-bus network
  • USB powered for calibration changes when removed from vehicle
  • On-board 41 PSIA (25 PSI boost) MAP sensor
  • 2Mb Internal data logging

PRECISE FUEL DELIVERY

The F/IC intercepts the signal to the stock injectors, allowing the user to modify pulse-width by +/-100%. The F/IC is among the only piggy-back systems that can decrease injector pulse-width, allowing the user to drive larger aftermarket injectors while still maintaining proper air / fuel ratios. This powerful system can also tap into the factory injector signal and work independently to drive up to six (6) additional injectors.

TIMING RETARD CONTROL

The F/IC can retard timing from the factory system based on engine RPM and load inputs. This is achieved by intercepting and delaying the outputs from the cam and crank position sensors to the engine- with no adverse effect on applications equipped with variable cam timing.

SENSOR CALIBRATION & CONTROL

The F/IC can also be used to recalibrate / clamp the MAF sensor, eliminating common problems with non-boosted factory MAFs. The on-board MAP sensor allows for proper fueling in boosted conditions.

CAN-BUS SYSTEMS NOT AFFECTED

Since the F/IC works in conjunction with the factory ECU, late model-vehicles equipped with a CAN-BUS system retain functionality of climate controls, dash and other components on the network.

  • Configurable load and RPM break points
  • Modify injector pulse-width by +/- 100%--drive larger aftermarket injectors and maintain proper AFR!
  • Drive up to 8 additional injectors
  • Drives high- or low-impedance injectors with addition of AEM Peak & Hold Injector Driver
  • Retards timing based on engine RPM and load inputs
  • “Clamp” the MAF for proper fueling in boosted conditions

PRODUCT COMPARISON: F/IC-6 & F/IC-8

FEATURES F/IC-6 F/IC-8
Injector Channels 6 8
Advanced Injector Load Simulation & Filtering NO YES
Timing Channels (Cam + Crank) 3 5
High/Low Voltage Selectable MAG-Driver Outputs NO YES
TPS Input YES YES
MAP Sensor (Onboard) YES YES
MAP (0-5v Intercept) YES YES
Frequency Based Flow Meter Support NO YES*
Speedometer Recalibrator NO YES*
O2 Sensor Remapping YES YES
External AFR Input YES YES
Generic 0-5v Remappers 2 2
Boost Controller (Requires AEM 30-2400 Solenoid) NO YES
IAT Logging Input NO YES
PC Datalogging YES YES
Internal Logging Memory 64 Kb 2 Mb
VTEC Output/Control/+12V Switched Output YES YES
MAG or HALL Sensor 30-1910 30-1930
MAG Pickup Sensor. 80's-90's Disributed Honda 30-1911 N/A
MAG Pickup Sensor for 2000-2005 Honda S2000 30-1912 N/A
MAG or HALL with Circuit Driver for Injector Load on Chrysler Vehicles 30-1913 N/A
Dodge HEMI N/A 30-1931

Alle Rechte vorbehalten
Alle Preise inkl. MwSt. zzgl. Versandkosten 

Dieser Shop wurde mit customify.de erstellt